Naganpuriya Group
Vijay Nagar, Indore, Madhya Pradesh
GST No. 23ATFPN0265Q1ZE
TrustSEAL Verified
Call 0804606602295% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 5 Piece |
| Equipment Type | Poultry Exhaust Fan |
| Fan Size | More than 50 inch |
| Motor Power | 3 HP |
| Fan Type | Exhaust Fan |
| Power | 380V/50HZ |
| Speed (Rpm) | 1440 |
| Warranty | 1 |
| Number of Blades | 6 |
| Product Type | Section Fan |
| With Remote | No |
| Voltage (Volt) | 380 |
| Weight (kg) | 63 |
| Electric Current Type | AC |
| Wiring | Copper |
| Warranty (Year) | 1 |
| Phase | 3 |
| Frequency (Hz) | 50Hz |
| Diameter (Millimeter) | 1530 |
| Noise Level (dB) | 64 |
| Blade (Inches) | 1400MM |
| Power Consumption (watt) | 1500 |
| Finishing Type | GI |
| Item Code | NSF60INCHES |
| Size (inch) | 60 |
| Motor Speed (Rpm) | 1400 |
| Quantity Per Box | 1 |
| Air delivery (cmh) | 55800 |
| Is It Pull Cord | not available |
| Full Metal Body | Yes |
| Remote Control | No |
| Condition | New |
Widely applied in a range of livestock Husbandry Farms, Greenhouses, Industrial Buildings for the Ventilation and Air Cooling
BodyNylon PA66
Fixed partscopper rivets
Make sure the shutters are completely open at the least air resistance against the biggest air flow, and closed with tight blocking for the light and wind.
As the first adopted with excellent nylon PA66, ensure the long service life.The linked part are fixed with copper rivets, which are wear-resistant, anti-rust, flexible,and friction coefficient's reduced.
Surface Fineness DegreeBA
Thickness1.2mm
Material OptionsStainless Steel/ Hot-galvanised Sheet/Al-Alloy/FRP
Fan blade is made of Krupp stainless steel by punch forming, which makes the blades off-dust with aesthetic appearance, meanwhile the constant big air volume with little possibility of distortion or broken.
They are also adjusted by intelligent tester, making the dynamic balance is controlled within 1g, the international standard, ensured the smooth running, lower vibration, less noise, increased stability.
Process MaterialDie-casted Aluminum-Magnesium Alloy
Surfacegrit-blasting
OriginalDomestic / Imported
Light weighted ,high corrosion resistance. Specialized 3-reinforced-rib design ,together with the grit-blasting on the surface ,besides the aesthetic appearance, the internal force is eliminated, improved the intensity and stability, genders no broken possibility.
Brand/OriginalDomestic or Japanese Mitsuboshi
Either brand can ensure the long service life ,and maintanance-free. Our domestic B type, instead of A type in most of other factories, has 3 times longer service life.
Brand/OriginalDomestic/France
Imported double-row bearings with waterproof design, high intensity ,
low noise, long service life and maintanance-free.
Material OptionsHot-galvanised/ Stainless-Steel/Al-Alloy
Alternatives for hot-galvanised steel sheet (zinc thickness at 180g/m2 or 275g/m2), or stainless steel (304/430), both efficiently improved the anti-corrosion capacity. Size can be customised.
BrandDomestic Laoyite/Simons
Protection DegreeIP55
Insulation DegreeF
Also can install Phase-loss protection device , for the notification of fault conditions and provide control contacts to turn off motors before damage occurs.
Custom-made for the Voltage ,Frequency as requested.
Plate-type shutter sealing clips make installation intenser , and the friction coefficient between fixed clips and rotational arm is much smaller than the original model which used the direct friction with plate. Hence this improved design make the opening&closing more flexible.
Recessed HandlesEasy carrying, assembling and disassembling.
Rational design without injuring hands, plus elegant look.
Additional Information: